Power Commander III USB | CA A.R.B Power Commander III USB-EX

Power Commander V | Jet Kits | Quick Shifter / Ignition Modules

Power Commanders

The PC is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The PC uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the PC's onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the PC returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.

Link to Downloads and Installation of your Power Commander

LCD DISPLAY ACCESSORY FOR

POWER COMMANDER  III USB/USB-EX

• Connects to any Power Commander USB via a “quick-disconnect” cable
• Designed to remain on the bike at all times, even in harsh weather
• Displays all available data from the Power Commander when connected
• Store and switch between multiple maps in the on-board memory; maps can be sent to the Power Commander “on the fly”
• Adjust maps using the controls on the display screen
• Logs data for later analysis
• Increase data storage for maps and logging by adding an SD Memory card; sold separately
• Can easily remove from the bike to program with a desktop computer
• USB programmable and upgradable
• Uses an Active matrix TFT LCD 240 x 320 16 bit screen

LCD MULTI-FUNCTION HUB ACCESSORY FOR

POWER COMMANDER  III USB/USB-EX

• The Multi-Function Hub allows access to advanced expansion features of the Power Commander USB
• Compatible with the LCD display, but the display is not required
• Four separate functions can be accessed with the Multi-Function Hub
• The Map Selection Switch (7/8” bar mount) allows the rider to switch between two different maps in the Power Commander. This allows a map for economy and a separate map for performance
• The Gear Position/Speed function allows fuel and timing adjustments to be made depending on the gear selected and the position of the throttle, up to +/-50% fuel and +/-10 degrees of timing
• Pressure input allows the fuel to be increased along with the boost level on turbocharged installations. The change of boost level does not require a re-mapping of the Power Commander
• Relay outputs allow up to two warning lights or relays to be triggered independently to activate items such as shift lights, nitrous systems, or air shifter. The trigger can be by throttle percent, rpm, or both
• Comes complete with installation instructions, wiring diagrams and CD with the required software updates

   

  Description	Item Number
  Multi-Function Hub and wiring harness for Map Selection Switch only	1020-0326
  Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed sensor, Pressure Input and two relay outputs	1020-0327

Power Commander III USB | CA A.R.B Power Commander III USB-EX

Power Commander V | Jet Kits | Quick Shifter / Ignition Modules

Accept Credit Cards	Checkout	Home	916-641-7800	FAQ & Help
	Shipping	Email		Store Policies
Order Tracking	©2009 by Motorcycle Pro Shop. Any reproduction of this site or it's contents requires express written consent.