Paul Yaffe Motorcycle Products

Deuce Axle

• Clean cool design from Paul Yaffe.
• Flush fit really adds style.

Soncy Road Fork Stabilizer

• Clean style, adds rigidity to the front forks.

Ali Baba Fork Caps

• One-piece design.
• Brilliant chrome finish.
• Protects fork seals and adds a visual highlight.

Ali Baba Riser Bolt Kit

• Highlight a forgotten detail.
• Two 1/2" coarse riser riser bolts feature small set screws drilled into the bolt head.
• Our cool Ali Baba bolt covers screw right on to add style.
• Perfect match for other Ali Baba products.

Ali Baba Choke Knob

• Beautifully chromed aluminum choke knob.
• Replaces the plastic knob on most carbs by using the included set screw.
• Knob can also be screwed on to 10/32 threaded cables.
• Matching points cover, derby cover and head bolt covers available separately.

Ali Baba Head Bolt Covers

• Machined from 6061 T-6 aluminum and chrome plated.
• A great detail addition to your bike.
• Sold in a set of four.

Ali Baba Points Cover

• All mounting hardware is concealed so you get a super-clean look.
• Made of chrome-plated 6061 T-6 aluminum.
• All necessary installation hardware included.
• Pre-drilled in a 2-5 bolt pattern to fit both Evolution, TC88 and most aftermarket motors.

Ali Baba Derby Covers

• Install using hidden mounting hardware so the finished look is super clean.
• Made of 6061 T-6 aluminum that is chrome-plated and given a polished finish.
• Includes all necessary installation hardware.

Bolt-on  Springless Kickstand

• Clean, no-spring look in a bolt-on version.
• Completely smooth, chrome-plated design.

Custom Handlebars

• Wild designs from the mind of Paul Yaffe.
• Multiple custom bends so you get the fit you want.
• All bars (except those listed below) are designed to fit triple trees with 3.5" wide riser mounting holes.
• Chopper handlebars for 46-degree front ends are designed to fit front ends  with at least a 46-degree rake and 3.5" centers in the triple trees.
• Standard Chopper handlebars fit most stock 73-05 models that use risers with 3.5" centers (do not fit Springer Softails)
• Springer Chopper handlebars fit 88-02 Springer Softail models.

Pictures of grips and footpegs w/shift peg, cone spacer and mirror arm

Custom Billet Grips

• Pictured above is grips, footpegs w/shiftpeg, mirror arm, and cone spacer.
• Machined from solid aircraft aluminum, then chrome plated.
• Grip Spacers mount between the left grip and the clutch to smooth the transition from the grip to the lever.
• Throttle coupler matches the left-side grip spacer, will work with most grips for stock throttle housing (utilizes single-cable operation only)
• Grip end mirror arm mounts in the end of the clutch-side grip for a new option in mirror mounting (Yaffe grips only)
• Grip end mirror arm accepts most small-diameter mirror heads that thread onto mirror stem.
• Matching footpegs available separately.
• Made in the USA.

Custom Footpegs

• Chrome-plated billet footpegs.
• Mounts to OEM-style footpeg clevis.
• Matching shift pegs also available.
• Shifter peg extension moves shift peg out 1" for easier access.
• Made in the U.S.A.

Choke Cable Bracket

• Clean, stylish way to mount the choke knob on CV carburetors.
• Add our Ali Baba choke knob for the complete look.

Soncy Kleen Klip

• The cleanest cable guide around.
• Trick little guides snap right on to 41mm forks.
• 6061 T-6 construction, then polished to a mirror finish.
• Accepts up to a 5/16" buildable line.
• Sold each.

Zombie Gas Cap

• Leak-proof and oh so small.
• Weld-in unit drops into any steel tank for a minimalist look.
• Dimensions: Bung measures 1.5" dia.; cap measures 1 3/4" dia.

Oil Line Adapters

• Let you connect rubber or braided oil lines to your engine.
• Work like compression fittings so no ugly hose clamps are visible.

Force Air Cleaner Cover

• Steel accent piece adds even more style to your Force air cleaner cover.
• Every cover is made by hand and the chrome plated.

Air Cleaner Fairing

• Bolts directly to Screamin' Eagle air filters.
• Available with a chrome or raw finish.

The Detail

• The coolest neutral switch hole plug ever .
• Solid stainless construction.
• Screws right in and looks great.
• Fits 5-speed Big Twin transmissions.

Thicky                                                                                DEI                                Thinny

Custom Steel Front Fenders

For 21" Wheels

• All fenders are spun from 12-gauge steel.
• Require custom mounting.
• For use with front tires.
• Made in the U.S.A.

DEI Front Fender For 16"/18" Wheels

• The perfect upgrade for your Fat Boy, Heritage or FLT custom.
• Fits great over 16" or 18" wheels with low-profile tires.
• Spun from 12-gauge steel.
• Requires custom mounting.

U-Doit Steel Front Fender Blanks

• Fender blank is spun from 12-gauge steel.
• Allows you to design your own fender for a true one-of-a-kind style.
• Require custom mounting.
• Made in the U.S.A.

VQSpikeSho-MeShadow 17Hi-5Fatty

Custom Steel Rear Fenders

• Rear fender blanks for frame-mounted applications.
• All fenders are spun from 12-gauge steel.
• Require custom mounting.
• Fattys also available with mounting kit.
• 11" wide fenders for use with  18" x 10.5" tires.
• 9" wide fenders for use with 18" x 8.5" tires.
• Shadow 17 fender for use with 17" rear tires.
• Made in the U.S.A.

U-Doit Steel Rear Fender Blanks

• Rear fender blanks for frame-mounted applications.
• All raw fender blanks are spun from 12-gauge steel and are available with a standard round or Pro Street square cross-section profile.
• Allows your imagination to design your own fender.
• Require custom mounting.
• Made in the U.S.A.

Deuce Front Fender Spacer Kit

• For FXSTD models when using a Paul Yaffe Original front fender.

Fatty Fender Struts

• Match the radius of our Fatty style rear fenders.
• Machined from 1/2" cold rolled steel.
• For custom applications.

Dresser Custom License Plate Holders

• Cool kit cleans up the back of your Dresser.
• Relocates license plate below stock taillight where turn signal bar bolts on.
• Then cut off the stock license plate bar and use our trick billet hole plugs to finish the look.
• Made in the U.S.A.

Maltese Cross Led Taillight

• Machined from 6061 T-6 billet aluminum.
• Features a stepped perimeter.
• Four blue LEDs in center of light for a "blue dot" appearance.
• LEDs are super-bright, brake light features a strobe light effect when first applied, then goes to a solid red brake light.
• Measures 4" x 4" and is 1" deep with a flat back.
• Optional steel shadow box allows for easy frenching applications on radiused surfaces.
• Made in the U.S.A.

Note: Not DOT approved.

Catzeye LED Taillight

• Machined from 6061 T-6 billet aluminum and chrome plated.
• Features a stepped perimeter.
• LEDs are super-bright and feature a brake light circuit.
• Flat back can be mounted to any 1" diameter tube on the frame  or swingarm; perch available for left- or right-side applications.
• Made in the U.S.A.

Note: Not DOT approved

Weld-In Shadow Boxes

• Hand-fabricated and welded steel boxes.
• Simple installation, just cut a hole in your fender and weld it in.
• Comes complete with Catzeye or Diamond Eye taillight.
• License plate box requires the use of the PYO universal tag frame.
• Made in the U.S.A.

Classic License Plate Frame and Universal Backing Plate

• Backing plate comes with an assortment of pilot marks so you can customize the application as needed.
• Can be used as a laydown fender plate, or on all FLT and Road King models.
• Backing plate can also be used with any Paul Yaffe Originals sidemount brackets for a clean, minimal look.
• Classic license plate frame features hidden holes for a smooth look.
• Frame and backing plate sold separately.

Sidemount License Plate Holders and Mounts

• All components are machined from billet aluminum and then chrome plated.
• Classic license plate holders feature classic frame with backing plate; available with either a tag light, rectangular LED brake light or Catzeye taillight.
• Pointed license plate holders feature pointed license plate frame with backing plate and a Diamond Eye taillight or tag light.
• Required mounting brackets offer multiple custom mounting options (sold separately).
• Made in the U.S.A.

Radius Side-Mount License Plate Holders With Brake Light/Taillight

• Tag holder, LED brake/taillight and rear brake caliper bracket all in one.
• Comes complete with radius side-mount license plate, bracket and all necessary mounting hardware and instructions.
• Caliper brackets accept most popular brands of billet 4-piston brake caliper.
• Right- and left-side applications available.
• For use with 3/4" axels only.

Richie's Regulator Mount

• Replaces the ugly stock mount.
• Aluminum construction with a plain finish.

Dresser Dash

• Fiberglass dash is a great way to add sleek style to your FLT.
• Direct replacement for stock, can be cut to length.
• Comes extra-long so it will work with even the longest custom stretch tanks.

	Checkout	Home	916-641-7800	FAQ & Help
	Shipping	Email		Store Policies
	©2008 by Motorcycle Pro Shop. Any reproduction of this site or it's contents requires express written consent.