BILLET LOWER FORK LEGS

• Include removable caliper brackets for single and dual caliper applications
• Accept stock or custom calipers using 11.5'' rotors (calipers not included)
• Feature hidden billet aluminum fender supports
• Choose from a smooth or ball-milled finish
• Available in chrome or black anodized finish
• Made in the U.S.A.

FOR 84-99 FXST, 93-99 FXDWG AND 84-86 FXWG

CHROME

BLACK

CHROME FORK TUBE ASSEMBLIES

• Assemblies come complete with fork tubes, springs, damping rods, bushings, clips, seals, slider tube caps, fork tube plugs and O-rings
• Available in a wide range of lengths for virtually any custom application
• Sold in pairs

NOTE: Customer must install fork oil.

FOR 86-99 FLST/F/N, L84-99 FXST/C, L84-86 FXWG, 93-99 FXDWG AND L84-96 FLT MODELS

CUSTOM BILLET FORK BOOTS

• Chrome billet aluminum fork boots add a touch of class to the tops of your fork sliders
• Available in two styles to fit 41mm fork sliders
• Attach firmly with a setscrew
• Made in the U.S.A.

FOR 84-05 FXST/C, 93-05 FXDWG AND 80-86 FXWG

MILLENNIUM CHROME FORK TUBE COVERS

• Billet aluminum ball-milled tube covers fits 41mm forks
• Covers fit between the upper and lower triple tree for that real custom look
• Made in the U.S.A.

41MM LOWER LEG DUST COVERS

• Thread-on style dust covers fit Pro-One and many custom lower leg applications
• Billet construction, available in contoured and tapered styles
• Chrome or black anodized finish
• Sold in pairs

CHROME

BLACK ANODIZED

BILLET 41MM TRIPLE TREES

• 41mm Wide Glide triple trees constructed of billet aluminum
• Smooth or ball-milled finish
• Now available in chrome or black anodized finish
• Available with or without integral turn signal indicators

FOR 84-99 FXST/FLST, 93-99 FXDWG AND 84-86 FXWG

CHROME

BLACK ANODIZED

FAT-TREETM 41MM TRIPLE TREES

• Will lower the front of your bike 3/4'' using stock 41mm fork tubes
• Stem bolt is installed from the bottom and threads into the top tree for a cleaner look
• Trees can use Pro-One's Hide-Away fork stop (sold separately)
• Include handlebar dampers; will not accept stock headlight housing
• Fork stem and all hardware are stainless steal
• Bearings, bearing cups, bearing races and dust shields must be purchased separately
• Now available in chrome or black anodized finish
• Made in the U.S.A.

FOR 84-99 FXST/FLST, 93-99 FXDWG AND 84-86 FXWG

CHROME

FORK STOP

BLACK ANODIZED

FORK STOP

RAKED 41MM TRIPLE TREES

• Billet aluminum construction
• Flush top design eliminates fork tube nuts
• Come in smooth or ball-milled finish in 3 degree rake, 5 degree rake or 7 degree rake styles
• Now available in chrome and black anodized finish
• Available with or without integral turn signals

FOR 84-99 FXST/FLST, 93-99 FXDWG AND 84-86 FXWG

CHROME

BLACK ANODIZED

UNIVERSAL FORK STOP

• Polished stainless steel construction
• Has two pinch-type stops on a horseshoe bracket that bolts to the lower triple tree
• For custom applications

HIDE-AWAY FORK STOP

• Work on all Pro-One triple trees
• Installation on other trees may require some drilling
• Kits include two bearing cups, a top dust shield and a bottom stop plate
• Made in the U.S.A.

LOWER TRIPLE CLAMP COVER

FOR YAMAHA ROAD STAR/ROYAL START MODELS

• Available plain or with recessed turn signals
• For Yamaha Road Star/Royal Star
• Custom headlight required; available separately
• Turn signals must be removed when using cover with the signals included

FOR YAMAHA ROAD STAR

FOR YAMAHA ROYAL STAR

CUSTOM REAR FOOTPEG MOUNT KIT

• For Yamaha Road Star models
• Chrome-plated billet aluminum construction
• Available in smooth and ball-milled styles
• Includes mounting plate, adjustable pegs, hardware and instructions

CHROME BILLET FLOORBOARD COVERS

• Revive floorboards in minutes
• For Kawasaki VN1500D/E/G 96-02
• Replace stock rubber pads
• Install easily with stock mounting bolts (not included)
• Unique nylon buttons for a nonslip surface
• Sold in pairs

BILLET ALUMINUM FLOORBOARDS

• Machined from billet aluminum, then ball-end milled for a custom look
• Available in a chrome finish
• Made in the U.S.A.; sold in pairs

CHROME OVAL FOOTPEGS

• Replace stock footpegs
• Unique oval shape
• Sold in pairs

KAWASAKI VULCAN 800/1500 88-04

HONDA SHADOW 750 ACE 98-03

CUSTOM FOOTPEGS

• Chrome-plated aluminum driver and passenger footpegs with rubber inserts
• For Yamaha V-Star 650 98-03
• Sold in pairs

TANK PANELS

• Chrome-plated billet aluminum construction
• Available in smooth or ball-milled styles
• For Kawasaki Vulcan 1500D/E/G 96-03
• Will not fit fuel-injected models

STAGE 1 AIR CLEANER

• Billet aluminum cover and backplate
• Show-chrome plated
• Included 2'' washable filter element
• For Yamaha Road Star 99-03
• Replacement filter available separately

CHROME BILLET CARBURETOR COVER

• Hides the carb and fills in the gap on the left side of the engine
• Available in Smooth or ball-milled style
• Fits 750 Shadow ACE 98-03

OIL COOLER KIT

• Billet aluminum oil cooler is chrome plated and features cooling louvers in tube body
• Available with or without oil pressure gauge
• For Yamaha Road Star 99-04 and Road Star Warrior 02-04 models

NOTE: Will not fit with highway bars.

CHROME BILLET OIL FILTER COVER

• Covers the stock Honda oil filter
• Available in smooth or ball-milled style
• For Honda Valkyrie GL1500C 07-00 and VF750C Magna 88-03

CHROME BILLET KEY AND CHOKE RELOCATION KIT

• Conveniently moves the key and choke control knob to a more suitable location behind the rear cylinder on Kawasaki Vulcan VN1500D/E 95-05
• Relocation plate, necessary hardware and instructions included
• PART # DS-373491 includes billet choke knob PART # DS-189140; PART # DS-373492 includes billet choke knob PART # DS-189141
• Available in smooth or ball-milled styles

REAR MASTER CYLINDER RESERVOIR

• Chrome billet reservoir directly replaces stock plastic reservoir on Road Star and 1100 V-Star
• Installs easily to the stock mount
• Includes custom billet cap and hardware
• Will accept the stock hose or a braided stainless steel hose (not included)

NOTE: Stock diaphragm and plastic bushing must be reused.

RECTIFIER COVER

FOR ROAD STAR

• Chrome billet construction
• Installs quickly with chrome hardware (included)

CHROME BILLET BRAKE PAD COVER

• Replaces stock rubber pad for a clean, custom look
• Unique nylon buttons for a nonslip surface
• For Kawasaki VN1500D/E/G Vulcan Nomad 96-02
• Works well visually with floorboard covers PART # DS-254303

CHROME HEEL-TOE SHIFTER COVERS

• Install over the stock heel-toe shifter
• Machined from billet aluminum and carefully chrome plated
• Works well visually with floorboard covers PART # DS-254303
• Unique nylon buttons for a nonslip surface
• Fit Kawasaki Vulcan VN1500D/E/G Nomad 96-02
• Sold in 2-pc. set

HORN COVERS

• Dress up Yamaha Road Star black plastic horns
• Covers fit snugly over front and rear horn for custom look
• Available in smooth or ball-milled style
• Sold in pairs

LICENSE PLATE MOUNT KIT

• Designed for the Kawasaki Vulcan VN1500D/E/G 96-01
• Machined from billet aluminum and carefully chrome plated
• Blind-hole design leaves no visible hardware on the face of the license plate
• Installs in stock mounting holes with no drilling or modifying required
• Kit includes license frame, backing plate with ball-milled lines, angle wedge and all necessary hardware

LICENSE MOUNT KIT

FOR 99-03 YAMAHA ROAD STAR

• Chrome billet license mount kit has blind-hole design, which means there is no visible hardware on the face of the frame
• Kit includes billet license frame, billet backing plate in either smooth or ball-milled style, angled billet wedge and all necessary hardware
• Easy to install, with no holes to drill

NOTE: Kit eliminates the stock rear turn signals. Aftermarket turn signals must be installed. We Recommend bullet light kit PART # 0903--0000 or PART # 0903--0001 that install off the Road Star's rear fender accents.

CHROME TURN SIGNAL LENS COVERS

• Chromed billet aluminum covers install quickly on stock turn signal assemblies
• CNC-machined; fir front and rear turn signals
• Include custom lenses and chrome countersunk screws
• For XVZ1300 Royal Star, Road Star and V-star
• Made in the U.S.A.; sold in pairs

CHROME TAILLIGHT LENS COVER

FOR ROYAL STAR

• Chromed billet aluminum construction
• Precision CNC-machined; installs easily over stock taillight lens to provide a custom look
• Chrome countersunk screws included
• Made in the U.S.A.

RISER CONVERSION KITS

• Kit adds a tach to Pro-One 4'' risers, PART # 1803--0000 or DS-290145
• Replaces the top clamp with a white- or black-face rpm gauge
• Includes hardware and instructions

CHROME BILLET 4'' HANDLEBAR RISER KITS

• Get that custom pulled-back look
• Include a pair of chrome risers, chrome billet top clamp and four chrome Allen head bolts
• Require 2'' longer throttle cable and 2'' longer clutch and brake lines (sold separately)
• Fit all Royal Star, Road Star and V-Star models
• Replacement top clamp available separately in smooth or ball-milled styles

• Made in the U.S.A.

REPLACEMENT TOP CLAMP

CHROME/RUBBER GRIPS

• Bright chrome-plated grips feature rubber inserts in straight or twisted styles
• For Yamaha Royal Star/Road Star/Drag Star/V-Star models 98-03, Kawasaki VN800B/VN1500A/B/C/D/E/G models 96-03 and Honda VT600C 88-99/VF750 Magna 94-97/VT750 Shadow/Shadow ACE 98-02/ VT1100 Shadow 87-97/ VT1100 Shadow ACE 95-98/ Shadow ACE Tourer 97-03/VT1100 Shadow Aero 98-02 and VT1100 Shadow Spirit 97-02

CHROME BILLET ALUMINUM GRIPS

• Direct bolt-on replacements for stock Royal Star grips
• Personalize one of the highest-profile areas on the bike
• Fit Yamaha Royal Star, Drag Star 96-02, Kawasaki Vulcan VN800B and VN1500A/B/C/D/E/G 96-02
• Available in standard or contoured
• Made in the U.S.A.

CHROME CRUISER GRIPS

• PART #s DS-243169, 0630--0047 and 0630--0048 replace stock Honda grips on VT600C Shadow 88-99, VF750 Magna 94-97, VT750 Shadow/Shadow ACE 97-02, VT1100 Shadow 87-97, VT1100 Shadow ACE 95-98, Shadow ACE Tourer 97-02, VT1100 Shadow Aero 98-02 and VT1100 Shadow Spirit 97-02
• PART #DS-243170 replaces stock grips for Yamaha XV1300 Royal Star 96-02, XVS650 V-Star 98-02, and Kawasaki VN800A Vulcan 96-02 and VN1500A/B/C/D/E/F/G Vulcan 88-02

HONDA

YAMAHA AND KAWASAKI

CHROME BILLET GRIPS

• Available in millennium, grooved and contour designs
• Fit 73-05 models, except those with air reservoir in the handlebars

CUSTOM HANDLEBAR GRIPS

• Straight and Twisted grips

FOR ALL 73-05 HARLEY MODELS (EXCEPT THOSE WITH AIR RESERVOIRS IN THE HANDLEBARS)

CHROME BILLET ALUMINUM MIRRORS WITH CLEAR GLASS

• Unique stainless steel pivot rides in a special nylon bushing; mirror heads will never lose adjustment or rust at the pivot
• Unsightly adjustment screws on the back of the mirror head are eliminated
• Can be installed on all H-D clutch or brake housings from 72-05; all necessary hardware included
• Made in the U.S.A.

OVAL

ROUND

RECTANGULAR

TEARDROP

SMOOTH WITH CUTOUT STEM

PRO-MINI CHROME MIRRORS

• Chrome-finish mirrors for any custom or stock Harley application
• Pro-Mini smooth (4 1/2'' x 1 1/2', Iron Cross (2 3/4'' x 2 3/4', milled (4 1/2'' x 1 1/2', Blade (5'' x 4', Diamond (5'' x 4' and Super Street (5'' x 3' mirrors feature long (5'' l x 4'' h) and short (3 3/4'' l x 3'' h) stems; contour style is 9'' l x 3 1/2'' h, teardrop-style is 7'' l x 4'' h
• Include both long and short stems and all mounting hardware

YAMAHA BILLET MIRROR HEAD

• Installs quickly and easily on stock Yamaha mirror stems
• Chrome-plated billet aluminum
• For Road Star, Royal Star and V-Star 650/1100 98-05
• Smooth or ball-milled styles
• Sold each

CHROME BILLET CABLE GUIDES

• Two-piece guides for throttle, clutch and speedo cables
• Sold individually
• Made in the U.S.A.

CHROME BILLET CABLE GUIDE

• Universal guide will mount to any flat surface
• Made in the U.S.A.

CUSTOM FUEL LINE CROSSOVER KIT

• Braided stainless steel, 6'' long
• Equalizes flow from both sides of tank
• 1/8'' pipe thread fittings to tank and -3 chrome AN hose ends
• For use with custom tanks that have 1/8'' NPT bungs in the bottom of the tank

SLIMLINE BILLET OIL FILTER MOUNT

• Chrome-plated 1/2''-thick billet aluminum mount with 3/8'' external fittings
• Provides a low-cost slim looking oil filter mount

BILLET OIL FILTER MOUNT

• Chrome-plated billet aluminum mount replaces cast OEM oil filter mount on models charted below
• Available in ball-milled and smooth styles
• Tapped for 1/4'' NPT (sold separately)
• Oil lines must be ordered separately

FOR 92-99 SOFTAIL/FXR AND 91-98 DYNA-GLIDE MODELS (OEM 26378-92/26381-92)

CHROME OIL COOLER KIT

• Kits available for mounting to 1 1/2'' or 1'' to 1 1/4'' frame tubes with supplied clamps and reducers
• Available with or without oil pressure gauge
• Gauge reads return line oil pressure, not engine oil pressure
• Comes with AN #6 fittings (use with -6 lines found in most speed shops)
• If using standard 3/8'' hose, use breather fittings DS-245263 (sold separately)
• Measures 12'' l x 2.25'' diameter

FOR 1'' TO 1 1/4'' FRAME TUBES

FOR 1 1/2'' FRAME TUBES

BULLET MARKER LIGHTS

• Universal lights are available in a smooth or ball-milled design
• Single-filament bulbs and amber lenses included
• 2 1/2'' l x 1'' diameter
• Sold in pairs

SADDLE BAG LID SUPPORTS

• Fit stock leather saddlebags
• Sold in pairs

POLISHED BILLET TRANSMISSION TRAP DOOR

• Machined from billet 6061 T-6 aluminum
• Show-polished finish
• Includes installed bearings
• Made in the U.S.A.

FOR 87-99 5-SPEED  BIG TWIN

CHROME BILLET PRIMARY COVER

• Available in ball-milled and smooth styles
• Matching derby cover and inspection covers are available separately

FOR 89-05 SOFTAIL AND 91-05 DYNA GLIDE MODELS

CHROME "SMOOTHIE" BILLET PRIMARY COVERS

• One-piece design eliminates derby and inspection covers
• Clean styling, the ultimate primary custom cover for your custom bike
• Will not work with belt drive primary systems

FOR 89-05 SOFTAIL AND 91-05 DYNA GLIDE

DERBY COVERS

• Chrome billet aluminum covers with a smooth or ball-end-milled design
• Made in the U.S.A.; sold individually

FOR 99-05 BIG TWIN

FOR 70-99 BIG TWIN (EXCEPT TWIN CAM 88)

INSPECTION COVERS

• Chrome finish in ball-end milled or smooth design
• Made in the U.S.A.; sold individually

FOR 70-05 FX/FL, FXST/FLST, FXWG AND FXDWG

FOR 85-05 FLT

CHROME BILLET TRANSMISSION END, SIDE AND TOP COVERS

• Aluminum covers are available with ball-end milled or smooth design
• Come with all mounting hardware; sold individually
• Made in the U.S.A.

FOR 87-05 BIG TWIN 5-SPEEDS

FOR 87-99 BIG TWIN

CHROME BELT GUARD

• Chrome-plated aluminum belt guard
• For Yamaha Road Star 99-03
• East installation; does not require removal of tire

GEAR SHIFT LINK

• Billet aluminum gear shift linkages come in two styles - cutout and ball-end milled
• Chrome finish
• Available in standard or 3'' extended length (as measured without the ends)
• Made in the U.S.A.

FOR 86-98 FLT AND 86-05 SOFTAIL (EXCEPT FLSTS)

BILLET FOOTPEGS

• Available in scimitar, rubber band and ball-milled styles
• Rubber band style matches forward control sets PART #s 1904--0003, 004, 0005 and 0006
• Fit all applications with male mount footpegs
• Sold in pairs

ADJUSTABLE BILLET FOOTPEGS

• 5 1/2'' footpegs can be comfort-adjusted by loosening the center bolt and turning to any angle
• Chrome finish with a ball-milled design
• Fit all bikes using male mount footpegs
• Matching shift pegs DS-253491, available separately
• Made in the U.S.A.

UNIVERSAL FOLDING FOOTPEGS

• Billet aluminum, ball-milled and chrome plated
• Universal mounting style using a 1/2'' bolt
• Made in the U.S.A.

CHROME BILLET FORWARD CONTROLS

• Controls feature folding footpeg design, with roller bearings and thrust bearing on all pivot points
• Mounting plates, brake and shift levers composed of 6061 T-6 aluminum steel for added strength
• Shift linkage rod, master cylinder and all mounting hardware included
• Matching footpegs available separately

NOTE: 3'' extended kits will require a custom brake line

FOR 00-05 SOFTAIL

FOR 84-99 SOFTAIL, 78-83 FX AND 73-83 FL MODELS

CHROME BRAKE CALIPERS

• Calipers are machined from 6061 T-6 billet aluminum, polished for a perfect finish
• Direct bolt-on design

FRONT CALIPERS FOR 00-05 MODELS (EXCEPT SPRINGERS, V-ROD AND 04-05 XL)

FRONT CALIPERS FOR 84-99 MODELS (EXCEPT FLSTS, FXSTS AND FX/XL WITH WIRE WHEELS)

REAR CALIPER FOR 84-99 SOFTAIL MODELS

REAR CALIPER FOR 00-05 SOFTAILS

CHROME BILLET TACH KIT

• Handlebar clamp, risers, tach mount, mounting cup and electronic tachometer included with all necessary hardware and installation instructions
• For Suzuki VL1500LC Intruder 98-04
• Easy plug-in installation (no wired to slice)

CHROME BILLET TACH KITS

• Conversion kit adds tach to Pro-One risers (PART #s 1803--0000 or DS-290145)
• Replace top clamp with a white- or black-face rpm gauge
• For Yamaha Road Star and V-Star models
• Include hardware and instructions

CHROME BILLET TACH MOUNT KITS

• Kit includes electric tachometer, billet handlebar clamp with mount, billet mounting cup and all necessary hardware and instructions
• Simple plug-in installation (no wires to splice)
• Available in smooth or ball-milled styles

NOTE: Will not fit with factory windshield.

NOTE: Works with Dyna ignition.

NOTE: Kit installs quickly on the Yamaha XV1600 Road Star 99-03 stock handlebar mounts using stock hardware and caps.

FOR KAWASAKI VULCAN VN1500D/E/G 91-01

FOR YAMAHA XVS650 V-STAR 98-04/XVS1100 V-STAR 99-04/XV1600 ROAD STAR 99-03

CHROME BILLET WHITE-FACE TACH MOUNT KITS

• Kits include electronic tachometer, billet handlebar clamp with mount, billet mounting cup and all necessary hardware and instructions
• Simple plug-in installation (no wires to splice)
• Available in ball-milled or smooth
• Fit all V-Star and Road Star models, attach to OEM handlebar risers

EXTRA-WIDE FAT-BOB TAILLIGHT

• Wide design for 8'' and 9'' wide fenders
• Measures 6 1/2'' W x 3'' T x 2'' D
• Available with or without built-in turn signals

NOTE: Not DOT approved

CHROME SHOW BIKE TAILLIGHT

• Billet aluminum construction
• Beautifully chrome plated
• Measures 5'' W x 2 7/16'' T
• Mounts to any flat surface

HYDRAULIC CLUTCH ACTUATOR

• Crafted from chrome billet aluminum

FOR ALL 87-05 BIG TWIN 5-SPEED MODELS

CHROME ALUMINUM TAILLIGHT/LICENSE FRAME ASSEMBLY

• Quality taillight machined from billet aluminum
• High-grade stainless steel mounting hardware included
• Made in the U.S.A.

NOTE: Not DOT approved

CHROME TAILLIGHT/LICENSE PLATE ASSEMBLY

• Diamond- and Slimline-style chrome billet license plate frames feature bright LED taillight with plate illuminator
• Available in horizontal or vertical styles with three-hole mounting bracket

WITH DIAMOND TAILLIGHT

WITH SLIMLINE TAILLIGHT

REPLACEMENT LED BOARD

CUSTOM LICENSE PLATE MOUNT AND BRACKET

• Chrome billet license plate frame with bright LED taillight and license plate illuminator
• Available in horizontal style with 3-hole mounting bracket

SIDE MOUNT FOR LICENSE PLATE

• Machined from solid aluminum and chrome-plated
• Mounts the license plate on the left side of the swingarm
• Requires the use of DS-270002C, DS-720084 or 400650 (sold separately)

FOR 87-99 SOFTAIL

DERBY-STYLE CHROME TAILLIGHT/LICENSE PLATE ASSEMBLIES

• Diamond- and Slimline- derby-style chrome billet license plate frames feature bright LED taillight with plate illuminator
• Available in vertical styles with either three-hole or five-hole mounting brackets

FOR 99-05 BIG TWIN

FOR 70-98 BIG TWIN

SIDE MOUNT LED TAILLIGHT/LICENSE PLATE MOUNTS

• Chrome billet license plate frames feature bright LED taillight illuminator
• Vertical style with three-hole mounting bracket to left side of swingarm

FOR 87-05 SOFTAIL

SIDE AND CENTER MOUNT MARKER LIGHTS AND RED LENS KIT

• Include amber lenses; amber or red rectangular replacement lenses available separately
• Marker light dimensions are 1'' x 2'' x 3 1/4'' (side moint) and 1'' x 2'' x 2 3/4'' (center mount)
• Made in the U.S.A.; sold in pairs

SIDE-MOUNT STYLE

CENTER MOUNTED

REPLACEMENT COMPONENTS

WELD-ON KEY SWITCH ASSEMBLY

• Sealed, water-tight switch
• Flat key design
• Included built in starter relay
• Welds onto 1 1/2'' frame tube

MILLENNIUM DASH COVERS

• Constructed of quality chrome-plated billet aluminum, smooth or ball-milled finish
• Covers the stock dash for a great custom look
• Made in the U.S.A.

FOR 94-05 FLHR (EXCEPT FLHR/SI)

SMOOTH BILLET TACH RISER KITS

• Smooth billet aluminum finish with brilliant chrome plating
• Kit includes handlebar clamp, 4'' risers, tach mount, mounting cup, electronic Smiths tachometer, installation hardware and instructions
• Easy plug-in installation, no wire splicing necessary

NOTE: Fits Yamaha models with stock windshield as listed below

SUZUKI

VL1500LC INTRUDER 98-04

YAMAHA

XVZ1600 ROAD STAR 99-05, XVZ1300 ROYAL STAR 96-05 AND XVS1100 V-STAR 99-05

CHROME BILLET TACH CONVERSION KITS

FOR YAMAHA ROAD STAR, ROYAL STAR AND V-STAR 99-05 MODELS

• Smooth billet aluminum finish with brilliant chrome plating
• Conversion kit adds tachometer to Pro-One risers PART#s 1803--0000 or DS-290145
• Replaces the top clamp cover with a white- or black-face gauge
• All mounting hardware and instructions included
• Fits models listed with stock windshields

POP-UP CAPS

• Pop-up vented gas caps assemblies are available in steel or aluminum construction
• Weld-in style, for custom applications

CHROME STASH TUBES

• Available in 10'' long or 7'' short styles
• Measure 2 1/4'' in diameter
• Open on both ends for easy access
• Available with clamps for 1'' to 1 1/4'' and 1 1/2'' frame tubes

1'' TO 1 1/4'' MOUNT

1 1/2'' MOUNT

LED TAILLIGHTS

• Bright chrome LED taillights available in diamond or oval styles
• Diamond style is 4 13/16'' W x 2'' H x 1'' D;
• Oval-style is 4 3/4'' W x 2 1/4'' H x 1 1/8'' D

POLISHED STAINLESS STEEL ROTORS

• Highly polished 11.5'' rotors with directional holes
• Made in the U.S.A.

FRONT

REAR

CHROME BILLET CHOKE KNOB COVERS

• Fit all plastic choke knobs
• Screw together for a positive fit
• Available in smooth or ball-milled finish

PULLEY SPACER

• Designed to move 84-99 rear pulley over when using a wide swingarm
• Stock bolt patters
• Made in the U.S.A.

STAINLESS STEEL ENGINE CASE PROTECTOR

• Protects lower engine case from road debris
• Mounts with front motor mount bolts

REAR FENDER ROCK GUARD

• Made from high-quality stainless steel
• Available in a polished finish

KICKSTAND WEDGE

• Aluminum wedge changes the angle of the kickstand so it does not have to be bent
• Sold each
• Made in the U.S.A.

BILLET BRAKE PEDAL PAD

• Replaces rubber brake pad OEM # 42532-82
• Chrome finish with ball-milled design
• Measures 2 1/8'' x 2''
• Comes with mounting hardware
• Made in the U.S.A.

ALUMINUM BRAKE PEDAL COVER

• Aluminum brake pedal cover features ball-end milled groove design and is available in a chrome finish
• Fits over existing brake pedals
• Attaches with contact cement (not included)
• Made in the U.S.A.

SHIFT LINKAGE ROD ENDS

• Chrome-plated rod ends
• Each rod end has female has female 5/16''-24 right-hand threads
• Made in the U.S.A.

BILLET SHIFT PEG

• Chrome-plated shift peg bolts directly to stock shifters
• Mounting hardware included
• Made in the U.S.A.

TEAR DROP TAILLIGHTS

• The hottest look in custom taillights
• Flush-mount design with a choice of plain red or blue dot lens
• Measure 2 5/16'' W x 5 1/2'' H x 3 1/2'' D
• Recessed tear drop bucket available separately
• Use 1157 replacement bulb PART #DS-282090PK; see bulbs section
• Made in the U.S.A.

TRIPLE TREE MARKER LIGHT BARS

• Chrome-plated light bars feature amber lights
• Fits between the fork tubes on Wide Glide or narrow glide front ends
• Mount to the headlight bolt
• Made in the U.S.A.

NOTE: May require the use of a load equalizer to function properly

FOR WIDE GLIDE (FXWG, FXST, FXSTC, FXDWG)

FOR NARROW GLIDE (FL, FX, XL)

REPLACEMENT COMPONENTS

VIPER CUSTOM LIGHTS

• Chrome-finished billet aluminum lights come with ball-end milled grooves
• Feature dual single-filament bulbs and amber lenses
• Measure 1'' x 6''
• Replacement red lenses available separately
• Made in the U.S.A.: sold in pairs

AIR CLEANER INSERTS

• Bolt-on inserts give a customized look to aftermarket or OEM air cleaner
• Constructed of billet aluminum and available in a chrome finish
• Made in the U.S.A.

84-99 80'' BIG TWIN 8'' ROUND INSERT

99-05 TWIN CAM 88 MODELS WITH OEM AIR CLEANER INSERT

HYPERCHARGERTM INSERT

S&S E AND G AIR CLEANER INSERT

STAGE 1 BILLET AIR CLEANER

• Increases airflow and performance
• Inner and outer covers are CNC-machined from billet aluminum and then chrome-plated
• Includes all necessary hardware for installation
• Air filter element is washable and reusable

FOR 93-99 BIG TWIN EVO-STYLE MOTORS

FOR S&S CARBS

FOR MIKUNI HSR CARBS

DELL'ORTO CHROME AIR CLEANER

• Designed to fit Dell'Orto dual-throat carburetors
• Incorporates all the features you're looking for - aluminum base, foam filter element, countersunk screws and a ball-end-milled top
• Available in a high chrome finish

ALUMINUM CRANKCASE BREATHERS

• One-piece billet aluminum crankcase breathers with chrome finish
• Accept 3/8'' hose, and the universal mounting base makes installation a snap; chrome mounting hardware included
• Made in the U.S.A.; sold individually

SIDE-MOUNT ELECTRICAL BOX AND WIRING HARNESS

• Locates ignition and some other handlebar switches to a custom side-mount position
• Improves the look of any custom bike
• Three kits to choose from with easy-to-follow instructions
• Available with chrome steel or billet aluminum boxes

CHROME STEEL

CHROME BILLET ALUMINUM

DASH BASE WITH WIRE HARNESS KIT

• Kit comes complete with dash base, ignition switch, flasher unit, circuit breakers and dash wiring harness (handlebar harness must be purchased separately)
• Comes with easy-to-follow instructions and wiring diagram
• Fits most flat side split tanks with cast dash

CHROME OIL TANK ISOLATION MOUNT COVER

• Chrome billet cover will hide those ugly rubber mounts
• Made in the U.S.A.; sold in pairs

ALUMINUM DASH COVERS/PANELS

• Custom dash housing covers and panels are constructed of billet aluminum
• Ball-milled grooves in a chrome finish add extra style
• Made in the U.S.A.

FOR 84-95 SOFTAIL AND 83-86 FXWG

FOR 93-03 FXDWG

POINT COVERS

• Custom aluminum covers available with a smooth or ball-end milled design
• Feature a chrome finish
• Made in the U.S.A.; sold individually

FOR 99-05 TWIN CAM MODELS

FOR 70-99 BIG TWIN MODELS

BILLET ROCKER BOX COVERS

• Machined from solid aluminum, then chrome-plated
• Two-piece design  features O-ring seal for leak-free operation
• Include chrome hardware

FOR 99-05 TWIN CAM 88 MODELS

LOW-PROFILE GAS CAPS

• Made from chrome-plated billet aluminum
• Available in three styles: smooth, ball-milled and star
• Made in the U.S.A.; sold each

FOR 82-E96

FOR L96-05

CHROME BILLET LICENSE PLATE MOUNT ASSEMBLIES

• Unique hidden mounting design eliminates visible bolts on the face of the license frame
• Include backing plate, frame and wedge bracket

NOTE: Will not fit FLSTN models.

CHROME BILLET LICENSE PLATE MOUNT ASSEMBLY

• Replaces stock license plate mount
• Includes backing plate, frame and mounting block
• Measures 4'' x 7''
• Made in the U.S.A.

CHROME LICENSE BACKING PATES

• Available in a ball-milled or smooth design
• Measure 4'' x 7''

CHROME BILLET LICENSE PLATE HOLDER

• Installs on the stock rear turn signal assembly
• No screws show on the plate side with the blind-hole design
• Screws install from behind for a clean, smooth, custom look with no hole drilling
• Includes chrome billet license frame, backing plate, adapter mount and chrome hardware
• For standard 7'' x 4'' license plates
• Fits Honda VT750 ACE and GL1500C Valkyrie

CUSTOM BILLET LICENSE PLATE FRAMES

• Chrome billet aluminum construction
• Available in a ball-milled, smooth or grooved designs
• Made in the U.S.A.

NEW FOR 06

Accept Credit Cards	Checkout	Home	916-641-7800	FAQ & Help
	Shipping	Email		Store Policies
Order Tracking	©2009 by Motorcycle Pro Shop. Any reproduction of this site or it's contents requires express written consent.